Live Broadcast
Jellyfin allows you to watch and record live television using supported hardware, as well as listen to internet radio. The first step is setting up a tuner to send data to Jellyfin, and then configure a source for the program guide data.
See the Live TV setup guide for detailed instructions.
Tuner
Jellyfin has support for the following tuners:
- HDHomeRun
- M3U
HDHomeRun is a special case because they will usually get detected automatically by the server. Otherwise you can manually add tuners by navigating to Live TV in the settings and adding one there.
Docker users using HDHomeRun devices should set networking to host mode as Jellyfin needs to connect to a changing UDP port.
M3U allows you to add IPTV channel playlists which you can view and record.
Additional tuner types are available via plugins.
Guide
Guide data will need to be mapped to their corresponding channels after a guide data provider is configured. The guide data formats below are included with the server:
- Schedules Direct
- XMLTV
Schedules Direct is a paid service providing electronic program guide data to the United States and Canada.
XMLTV is "... an XML based file format for describing TV listings. IPTV providers use XMLTV as the base reference template in their systems and extend it internally according to their business needs."
Status
You can view the status of each tuner connected to the server in the settings. There are also buttons to manually refresh the tuners if they experience problems.
The guide data can be refreshed manually if you run into problems. This isn't normally required since the data is refreshed periodically.